SWF100M2-20 Ashland 1HP Sewage Pump, 230VAC Single Phase
SWF100M2-20
$1,300.00
$0.00( / )
SWF100M2-20 Ashland 1HP Sewage Pump, 230VAC Single Phase Switch Type Manual HP 1HP Voltage 230VAC 60Hz Single Phase RPM 1750 RPM NEMA Start Code P Full Load Amps 10.8 Amps Cord Power Size 14AWG/3C Cord Type SOW Cord O.D. 0.55" Discharge Size 2" Flangedwith 2" & 3" NPT Adapter Impeller...
Categories:
SWF100M2-20 Ashland 1HP Sewage Pump, 230VAC Single Phase
| Switch Type | Manual |
|---|---|
| HP | 1HP |
| Voltage | 230VAC 60Hz Single Phase |
| RPM | 1750 RPM |
| NEMA Start Code | P |
| Full Load Amps | 10.8 Amps |
| Cord Power Size | 14AWG/3C |
| Cord Type | SOW |
| Cord O.D. | 0.55" |
| Discharge Size | 2" Flanged with 2" & 3" NPT Adapter |
| Impeller Type | 2-Vane Semi-Open Cast Iron |
| Cable Length | 20' |
| Solids Handling | 2" |
| Maximum Liquid Temperature | 104°F - Intermittent |
| Acceptable pH Range | 6 - 8 |
| Motor Housing | Cast Iron |
| Casing | Cast Iron |
| Impeller | Cast Iron |
| Motor Shaft | SS430 |
| Hardware | SST |
| O-Rings | NBR |
| Mechanical Seal | Single Mechanical Carbon Ceramic |
| Upper Bearing | 6203 |
| Lower Bearing | 6203 |
| RPM | 1750 RPM |
| Motor Type | PSC/Induction |
| Gen Insulation Class | B |
| Stator Winding Class | B |
| Maximum Stator Temperature | 130°C |
| Voltage Tolerance | +/-10% |
| Motor Protection | Thermally Protected |
| HP | 1HP |
| Service Factor | 1.00 |
| Type: | |
|---|---|
| Vendor: | |
| SKU: |
SWF100M2-20 |
| Weight: |
64.0 lb |
